Moisture Mapping
It is well-understood that moisture is a common issue in homes and buildings. Moisture can cause a variety of problems including mold, mildew, rot, and structural damage. Moisture mapping is a process of measuring the moisture content of a building to identify areas of excess moisture. This information can then be used to develop a plan to address the moisture problem and prevent future damage.
Acceptable Moisture Levels for Internal Walls
The acceptable moisture level for internal walls varies depending on the material of the wall. However, as a general rule, the moisture content of internal walls should not exceed 15%. Higher moisture levels can indicate a problem with water intrusion or condensation.
What Should Moisture Readings Be for Internal Walls?
The moisture content of internal walls can be measured using a moisture meter. Moisture meters are available at most hardware stores. To measure the moisture content of a wall, simply insert the probes of the moisture meter into the wall. The moisture meter will then display the moisture content of the wall.
If the moisture content of an internal wall is above 15%, it is important to investigate the cause of the excess moisture. The cause of the excess moisture could be a leak, condensation, or a problem with the building envelope. Once the cause of the excess moisture has been identified, it can be addressed and the moisture content of the wall can be reduced.